sectional rolling doors

SteelForm™ S-24C
Sectional Ribbed Doors

A simple solution for typical commercial and industrial door applications, the SteelForm S-24C commercial sectional ribbed door provides Raynor quality and durability in a limited selection of sizes, features, and options.

S-20 and S-24 Features and Options

Raynor SteelForm S-20 and S-24 sectional ribbed commercial doors are available with numerous features and options, including those listed below.

37 features 66a37719cfe2b

QuickDock™ Solution

Raynor’s patent pending QuickDock is engineered to decreases downtime and increases safety during repairs and maintenance. It comes complete with preassembled, palletized sections and the counterbalance assembly is mounted only 16” above the header. QuickDock is available on orders of 36 doors or more.

37 features 66a37719cff48

Durable Construction

Constructed with stainless steel rivets and roll-formed tongue-in-groove meeting rails for maximum structural integrity, SteelForm S-20, S-24, and S-24C doors are built to withstand heavy use.

37 features 66a37719d0003

Rugged Hardware and Springs

SteelForm S-20 and S-24 doors come packaged with the right combination of hardware, track, and springs to precisely match your door’s size and application and provide years of reliable service.

37 features 66a37719d00d3

Decreased Energy Costs

SteelForm S-20 and S-24 doors help you reduce energy costs with a U-shaped, vinyl bottom weatherseal secured by a sturdy aluminum retainer.

37 features 66a37719d0174

Header Seal

Flexible, EPDM rubber flap header seal on S-20, S-24, and S-24C reduces air infiltration and energy costs by sealing the top of the door against the header.

37 features 66a37719d0211

Jamb Seal

Jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the door when closed. Available in EPDM rubber or flexible vinyl flap.

37 features 66a37719d02a0

Section Joint Seal

SteelForm S-20 and S-24 doors are available with a neoprene foam rubber section joint seal to help prevent airflow between sections.

37 features 66a37719d0604

Insulation

SteelForm S-20 and S-24 doors are available with energy-saving insulation. Choose from white impact-resistant (shown) or steel (26, 24, or 20-gauge) back covers.

37 features 66a37719d06b3

Secure Locks

In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.

37 features 66a37719d0a95

EnduraCote™

The Raynor EnduraCote hardware system comes with springs, track, and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.

37 features 66a37719d0b7f

Choice of Windows

Select either 24″ x 8″ or fullview window sections. Choose from a variety of glass, insulated glass, acrylic and polycarbonate styles to suit any application.

37 features 66a37719d0cb9

Removable Center Posts

Carry-away, swing-up options available for extra-wide openings. Ideal for agricultural or airplane hangar applications.

37 features 66a37719d0d6f

Customized Track and Hardware

Track systems are supplied to fit special clearances, inclines, or contour applications. Hardware and track systems can be designed to fit any need. Additional trussing is available for special wind loading applications. A QuikClip™ pre-assembled track option is also available.

37 features 66a37719d0e17

Carbon Monoxide Vent

Allows you to channel fumes to the outside when the SteelForm door is closed. Available in a variety of sizes.

37 features 66a37719d0eb6

High-cycle Counterbalance System

For reliable operation in high traffic areas, choose high-cycle torsion springs with 25,000, 50,000, or 100,000 cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system.

37 features 66a37719d0f56

Riveted Sections

Rivets add strength to the door by making a firm connection between the outer steel and the mutts/end stiles.

Colors

SteelForm S-20

202407261022White Kynar Commercial Series smooth

White

Optional Post Paint Process*

202407231044Raynor ColorWave Logo

Raynor’s ColorWave™ features Sherwin-Williams® next-generation post paint system for your garage door. With 1,500 colors to choose from, home and business owners can couple this elite paint system with state-of-the-art Raynor manufacturing to craft the perfect look for their home or project.

* Not all colors are available in solar reflective paint, colors that are not available as solar reflective cannot be used on polyurethane doors.

Product Details

Door
TypeCommercial Sectional Garage Doors
ModelSteelForm S-24C
Size20′ x 16′ Max
OperationManual, Motor or Hand Chain
IECC Thermal PerformanceN/A
Sections
Construction1 or 2-Layer Pan
MaterialSteel
Surface TextureSmooth Ribbed
Section JointTongue-in-Groove
Section Thickness2″
GaugeSteel; Exterior: 24-Gauge Nominal
StilesEnd Stiles: 16-Gauge; Center Stiles: 16-Gauge
InsulationOptional Expanded Polystyrene with Impact-Resistant Covers (7.7 R-value)
SealsBottom Seal (3″, 4″ EPDM, or 3″ Yellow); Optional Header Seal
TrussingWind Load: 20 P.S.F. Tested/13.3 P.S.F. Design Load (standard); Material: U-bar (18-Gauge or 20-Gauge)
Panel ConfigurationNA
ColorWhite. Raynor’s ColorWave™ with 1,500 Sherwin-Williams® colors.
Windows24″ x 8″ or fullview section; glass: choose from a variety of standard or insulated glass, acrylic, and polycarbonate styles to suit any application
Track
TypeNormal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour, and QuikClip™ Pre-Assembled Track Options
FinishGalvanized
Size2″ or 3″
Gauge13, 16-Gauge
Counterbalance System
TypeTorsion Spring
SpringsSpring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″;
ShaftsTube or Solid (D-Shaft, 1″ Keyed)
Hardware/Accessories
Hinges11, 13, 14-Gauge or Hybrid
RollersStandard (2″) or Heavy Duty (2″)
FinishGalvanized
LockInterior Slide Lock or Exterior Lock Bars
Seal(s)Jamb Seal
Hanger Angle11, 13-Gauge Galvanized
Pedestrian DoorNA
Optional Wind LoadingCertified Wind Load Available
PostsN/A

Specifications

Select a link below to download Raynor SteelForm S-24C specifications and drawings.

WordPDFDrawings
S-24 Product SpecsDOCXPDF
Full Sectional Product Line SpecsDOCXPDF
BIM ObjectsDWG|RFA

Standard Drawings

2-inch Track/Bracket-Mounted
Normal HeadroomDWG DrawingPDF
Lift ClearanceDWG DrawingPDF
Vertical LiftDWG DrawingPDF
Low Headroom Front-MountDWG DrawingPDF
Low Headroom Rear-MountDWG DrawingPDF
2-inch Track/Angle-Mounted
Normal HeadroomDWG DrawingPDF
Lift ClearanceDWG DrawingPDF
Vertical LiftDWG DrawingPDF
Low Headroom Front-MountDWG DrawingPDF
Low Headroom Rear-MountDWG DrawingPDF
3-inch Track/Angle-Mounted
Normal HeadroomDWG DrawingPDF
Lift ClearanceDWG DrawingPDF
Vertical LiftDWG DrawingPDF
Low Headroom Front-MountDWG DrawingPDF
Low Headroom Rear-MountDWG DrawingPDF

Technical Information

Section and Panel Schedules

Door WidthNumber of Raised Panels
Up to 9′ 2″2
9′ 3″ – 12′ 2″3
12′ 3″ – 16′ 2″4
Door HeightNumber of Sections
Up to 8′ 2″4
8′ 3″ – 10′ 2″5
10′ 3″ – 12′ 2″6
12′ 3″ – 14′ 2″7
14′ 3″ – 16′ 1″8

Product Literature

2025 steelform series
202409020914202407261243QuickDock 1

SteelForm “S” Series Warranty

Door Sections:

Raynor® warrants the door sections against defects in material and workmanship, and deterioration due to rust-through for ten (10) years from date of delivery to the original purchaser. Window components are warranted against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.

Hardware:

Raynor® warrants all hardware against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.

Springs:

Raynor® warrants springs against defects in material and workmanship for one (1) year from date of delivery. The limited warranty for special high-cycle springs is prorated by percentage of cycle use, and must be determined by the use of a non-resettable cycle counter.

ColorWave™ Paint System:

Raynor provides a five-year warranty for the ColorWave Paint System (exterior only) against chipping, cracking, and peeling (loss of adhesion) from the date of delivery to the original purchaser. This warranty covers defects in materials and workmanship under normal use and proper maintenance. Please note that fading, as well as chipping, cracking, or peeling caused by dents or scratches, are not included in this coverage. Additionally, for doors made with polyurethane insulation, a solar reflective paint formulation is required to maintain the warranty. Ordering a color that does not meet this requirement will void the warranty for the ColorWave Paint System. Field applied paint is not covered by this warranty. This warranty applies only to the original purchaser and may be subject to inspection before approval of any claim.

Warranty Limitations and Exclusions:

Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for the installation or repairs shall be the responsibility of the consumer and must be performed by an qualified installer. This warranty applies only to door systems that are professionally installed by an authorized Raynor Dealer.

This limited warranty extends only to the original purchaser, provided the door is installed in the original purchaser’s place of business. This limited warranty is not transferable.

This limited warranty does not apply to black, charcoal, slate, and iron ore steel colors used on Raynor EnergyCore series, ThermaSeal Series, Commercial Country Manor and Commercial Aspen series doors when installed in areas experiencing extreme heat for prolonged periods of time. The result of these environmental conditions can elicit a failure of the polyurethane core of the door. The warranty also excludes doors which have been field painted where the paint does not include a solar reflective additive.

This limited warranty does not apply to any damage or deterioration to the door caused by abuse, negligence, missing components, accidents, use of pressure washers, dents or scratches. It also does not apply to damage or deterioration caused by saltwater coastal areas, hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers. Shavings from trolley rails not properly removed and cleaned from the exterior door surface causing rust are not covered by this warranty. Failure to provide proper maintenance voids this limited warranty. Field applied paint failure is not covered by this limited warranty. Refer to the Care and Maintenance Instructions and Painting Instructions.

This limited warranty does not apply to damage caused by fire, an act of God, accident, vandalism or graffiti. Damage or deterioration caused by saltwater coastal areas (within two miles), hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers is not covered by this limited warranty.

This limited warranty does not apply to building damage caused by moisture infiltration through or around the door. A garage door system is water resistant, but not waterproof. When a garage door system is properly assembled, installed, and maintained the risk of significant water infiltration is low.

Raynor shall not be liable for any consequential or incidental damages.

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY EXCLUDED.

Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.

Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase and photographs of the product in question to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.

This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.

1 1

American Made

We are proud to manufacture our products in North America, focusing on continuous improvement of our processes from start to finish.
quality assured

Quality Crafted

Our commitment to the quality of our products extends beyond the sale, with competitive warranties and industry-leading customer service.
service and installation

Service & Installation

Expert installation and dedicated service for all doors, all backed by competitive warranties and industry-leading customer service.
dock levelers

Explore More Products

DOCK BUMPERS, DOCK LOCKS, DOCK WEATHER SEALS