AlumaView® AV300

GET A QUOTE

AlumaView® AV300

Aluminum Sectional Rail and Stile Doors

A full 3″ thick, the AlumaView AV300 aluminum sectional rail and stile door is the sturdiest door in the AlumaView family. The increased thickness adds strength and durability. With the incorporation of the U-bar trussing inside the rails, there are no obstructions to your view.

The AV300 is the clear choice of aluminum doors for auto dealerships, car washes, corrosive environments, police, fire and ambulance stations, quick lubes, repair facilities, restaurants, marinas, sports facilities, and buildings with large opening sizes.

AV300 Features and Options

Each AlumaView aluminum sectional rail and stile door is engineered for superior performance. The following features and options are available to customize your door to meet your specific needs.

Years of Durability

AlumaView AV300 door sections are clear-anodized for maximum durability and are designed to withstand minimum wind loads of 20 p.s.f. Higher pressure ratings are available upon request.

Rugged Hardware and Springs

The AlumaView AV300 door comes packaged with the right combination of hardware, track, and springs to match your door’s size and application.

Decreased Energy Costs

AlumaView doors help you reduce energy costs with an U-shaped, vinyl bottom weatherseal secured by a sturdy aluminum retainer.

Snap-in Retainer

AlumaView AV300 panels and glass are sealed and held in place with a snap-in retainer. Clear anodized, RAL9003, RAL 9016 and standard white doors use gray snap-ins. All other doors use black snap-ins.

Integral U-Bar

Integral U-bar construction within the rails of the AV300 creates added strength to the section panels and provides for a clean look on the interior of the door by removing trussing obstructions from visible areas (only required for doors wider than 18’2″).

Header Seal

Flexible vinyl flap header seal reduces air infiltration and energy costs by sealing the top of the door against the header.

Jamb Seal

EPDM rubber jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the door when closed.

Choice of Windows

Available in impact glass, tempered, tinted, double pane, insulated, acrylic, or polycarbonate in a variety of thicknesses. Glass thickness range from 1/8″ to 1″.

EnduraCote™

The EnduraCote hardware system comes with springs, tracks, and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.

SleekSightline™

Our AV200 and AV300 models offer a sleek 1-pane or trendy 2-pane glass layout. These new glass layouts are available now and vary depending on glass type and door size.

Aluminum Panels

For busy work environments and to prevent glass breakage, aluminum panels protect your investment. Choose from insulated panels, kick panels, and impact-rated panels as well.

High-cycle Counterbalance System

For reliable operation in high traffic areas, choose high-cycle torsion springs with 25,000, 50,000, or 100,000-cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system.

Locks

In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.

Carbon Monoxide Vent

Allows you to channel fumes to the outside when the AlumaView AV300 door is closed. Available in a variety of sizes.

Customized Track*

Track systems are supplied to fit special clearances, inclines, or contour applications. Hardware and track systems can be customized to fit any need. Additional trussing is available for special wind loading applications. A QuikClip™ pre-assembled track option is also available. *Some options may be limited to door size or model.

Anodized Finishes

Choose from three custom anodized finishes including clear, dark bronze, and black.

IECC Air Infiltration Requirements/California Title 24

The International Energy Conservation Code (IECC) requires building components to meet minimum Air Infiltration rates. This option will ensure the AV300 and AV200 will exceed the latest IECC and Title 24 standards for air infiltration (only), by using the required header and jamb seals and track mounting. This Air Infiltration Package meets the IECC Requirements and California Title 24. Exhaust ports and pass doors cannot be used. Visit our IECC page for more information.

Elegant Finish Woodtones™

Aluminum coated with durable and long-lasting material that delivers a high definition wood grain look.

Colors

Anodized Finish Options

Clear

Dark Bronze

Black

ArmorBrite™ Powder Coat System

Custom Colors: ArmorBrite: 188 custom powder coated colors available.

Elegant Finish Woodtones™ Options

Aged Dark Oak

American Maple

Cherry

Cherry Flame

Colony Maple

Dark Walnut

European Cherry

Golden Oak

Knotty Pine

National Walnut

Oak

Table Cherry

Teak

Product Details

Door
Model	AlumaView AV300
Size	24′ x 24′ Max
Operation	Manual, Motor or Hand Chain
IECC Thermal Performance	Tested Air Infiltration @ 25 mph 0.21 cfm/ft2 Tested U-Factor 0.83 (w/ 1″ thick, insulated, Low E glass)
Sections
Construction	Rail & Stile – minimum .063″; 5/16″ diameter screws
Material	Aluminum
Surface Texture	Smooth
Section Joint	Tongue and Groove
Section Thickness	3″
Gauge	N/A
Stiles	Extruded aluminum – minimum .05″
Insulation	3/8″ Expanded Polystyrene (in panels only)
Seals	Bottom Seal (3″, 4″ Gray; 3″ Yellow; or 3″ Black EPDM), Optional Header Seal. Optional IECC and California Title 24 air filtration compliant package available.
Trussing	Wind Load: 20 P.S.F. Tested/13.3 P.S.F. Design Load (standard); Material: U-bar (18-Gauge or 20-Gauge);Sizes: 4″, 6″, or 8″
Panel Configuration	.50″ thick Aluminum panels
Color	Clear and Optional Anodized Finishes, ArmorBrite Powder Coat System, or Elegant Finish Woodtones
Windows	Various styles of glass options are available in 1/8” single pane, 3/16” single pane, ¼” single pane, ½” insulated, and 1” insulated configurations.
Track
Type	Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour, and QuikClip™ Pre-Assembled Track Options
Finish	Galvanized or Optional White Powder Coat
Size	2″ or 3″
Gauge	13 and 16-Gauge
Counterbalance System
Type	Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counterbalance
Springs	Spring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powder Coat
Shafts	Tube or Solid (D-Shaft, 1″ Keyed, 1-1/4″ Keyed)
Hardware/Accessories
Hinges	11, 13, 14-Gauge or Hybrid
Rollers	Standard (2″ or 3″) or Heavy Duty (2″ or 3″)
Finish	Galvanized or Optional White Powder Coat
Lock	Interior Slide Lock or Exterior Lock Bars
Seal(s)	Jamb Seal
Hanger Angle	11, 13-Gauge Galvanized or 13-Gauge White Powder Coated
Pedestrian Door	NA
Optional Wind Loading	Certified Wind Load Available

Specifications

Select a link below to download AlumaView AV300 specifications and drawings.

	Word	PDF	Drawings	Zip
AV300 Product Specs	DOCX	PDF
Full Sectional Product Line Specs	DOCX	PDF
BIM Objects			DWG	RFA ZIP

Standard Drawings

2-inch Track/Bracket-Mounted
Normal Headroom	DWG Drawing	PDF
Lift Clearance	DWG Drawing	PDF
Vertical Lift	DWG Drawing	PDF
Low Headroom Front-Mount	DWG Drawing	PDF
Low Headroom Rear-Mount	DWG Drawing	PDF
2-inch Track/Angle-Mounted
Normal Headroom	DWG Drawing	PDF
Lift Clearance	DWG Drawing	PDF
Vertical Lift	DWG Drawing	PDF
Low Headroom Front-Mount	DWG Drawing	PDF
Low Headroom Rear-Mount	DWG Drawing	PDF
3-inch Track/Angle-Mounted
Normal Headroom	DWG Drawing	PDF
Lift Clearance	DWG Drawing	PDF
Vertical Lift	DWG Drawing	PDF
Low Headroom Front-Mount	DWG Drawing	PDF
Low Headroom Rear-Mount	DWG Drawing	PDF

Technical Information

Section and Panel Schedules

Door Width	Number of Panels
Up to 9′ 2″	2
9′ 3″ – 12′ 2″	3
12′ 3″ – 16′ 2″	4
16′ 3″ – 20′ 2″	5
20′ 3″ – 24′ 2″	6

Door Height	Number of Sections
Up to 8′ 2″	4
8′ 3″ – 10′ 6″	5
10′ 7″ – 12′ 6″	6
12′ 7″ – 14′ 6″	7
14′ 7″ – 16′ 6″	8

Product Literature

EnergyCore Series Warranty

Door Sections:

The manufacturer warrants the door sections against defects in material and workmanship, and deterioration due to rust-through for ten (10) years from date of delivery to the original purchaser. The manufacturer also warrants the door sections against delamination of the polystyrene insulation from the steel skins for ten (10) years from date of delivery to the original purchaser. Window components are warranted against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.

Hardware:

The manufacturer warrants all hardware against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.

Springs:

The manufacturer warrants springs against defects in material and workmanship for one (1) year from date of delivery to the original purchaser. The limited warranty for special high-cycle springs is prorated by percentage of cycle use, and must be determined by the use of a non-resettable cycle counter.

Warranty Limitations and Exclusions:

Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized personnel, will, at its option, repair or replace the defective door components. Labor charges for the installation or repairs shall be the responsibility of the consumer and must be performed by an qualified installer. This warranty applies only to door systems that are professionally installed by an authorized Dealer.

This limited warranty extends only to the original purchaser, provided the door is installed in the original purchaser’s place of business. This limited warranty is not transferable.

This limited warranty does not apply to black, charcoal, slate, and iron ore steel colors used on EnergyCore series, ThermaSeal Series, Commercial Country Manor and Commercial Aspen series doors when installed in areas experiencing extreme heat for prolonged periods of time. The result of these environmental conditions can elicit a failure of the polyurethane core of the door. The warranty also excludes doors which have been field painted where the paint does not include a solar reflective additive.

This limited warranty does not apply to any damage or deterioration to the door caused by abuse, negligence, missing components, accidents, use of pressure washers, dents or scratches. It also does not apply to damage or deterioration caused by saltwater coastal areas, hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers. Shavings from trolley rails not properly removed and cleaned from the exterior door surface causing rust are not covered by this warranty. Failure to provide proper maintenance voids this limited warranty. Field applied paint failure is not covered by this limited warranty. Refer to the Care and Maintenance Instructions and Painting Instructions.

This limited warranty does not apply to damage caused by fire, an act of God, accident, vandalism or graffiti. Damage or deterioration caused by saltwater coastal areas (within two miles), hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers is not covered by this limited warranty.

This limited warranty does not apply to building damage caused by moisture infiltration through or around the door. A garage door system is water resistant, but not waterproof. When a garage door system is properly assembled, installed, and maintained the risk of significant water infiltration is low.

The manufacturer shall not be liable for any consequential or incidental damages.

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY EXCLUDED.

Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.

Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase and photographs of the product in question to the dealer from whom the product was purchased or call at 1-800-4-RAYNOR within the warranty period. The manufacturer may choose to have the product returned for inspection.

This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.

American Made

We are proud to manufacture our products in North America, focusing on continuous improvement of our processes from start to finish.

Quality Crafted

Our commitment to the quality of our products extends beyond the sale, with competitive warranties and industry-leading customer service.

Service & Installation

Expert installation and dedicated service for all doors, all backed by competitive warranties and industry-leading customer service.

Explore More Products

DOCK BUMPERS, DOCK LOCKS, DOCK WEATHER SEALS

Dock Seals & Shelters

Wire Cages & Partitions

Swivels Custom Carts

Check out some of our recent projects!

Real Projects. Real Customers. Real Solutions.

DockStar Industrial coordinated a large commercial wire mesh storage locker project, including delivery follow-up, supplier coordination, installation planning, site visit support, and final project details for approximately 100 storage lockers.

DockStar Industrial supplied and installed a railcar dock seal for an industrial loading door, helping improve weather protection, reduce air and debris intrusion, and support railcar loading operations.

DockStar Industrial supplied wire security storage lockers for a new apartment building in Mineola, Long Island. The project included 4' x 4' x 7'-6" tenant storage lockers designed for secure resident storage, bike storage, and efficient storage room organization.