Head Curtain Dock Seals

GET A QUOTE

Head curtain dock seal details showing the fabric curtain and foam side pads

How a head curtain dock seal works

A head curtain dock seal pairs two foam side pads with a full-width fabric curtain across the top. The side pads press against the trailer and close the gap at the building wall. The curtain hangs down to meet the trailer roof, so you get a seal up top without needing every truck to be the same height.

The standard unit fits 8′ wide x 10′ high door openings and seals trailers 12′ to 13.5′ tall on a typical 4′ dock.

Why mixed fleets pick a head curtain

A fixed head pad works great until a 12′ trailer backs in right after a 13’6″ one. Now there’s daylight over the trailer, and your heating bill is leaving through it. A head curtain drops to meet each trailer roof, so short trailers and tall ones both get sealed.

  • Seals the top gap on trailers from 12′ to 13.5′ tall
  • Keeps rain and blowing dust off the dock floor
  • Holds conditioned air inside, which matters most in cold storage and food distribution
  • Optional ropes and pulleys let your crew raise or lower the curtain to match the trailer
Head curtain dock seal sealing the top of a docked trailer
Close-up of a head curtain dock seal header and foam side pad

How it’s built

  • 10″ projection
  • 22 oz. Hi-Tear vinyl base fabric
  • Side pads made with 99% memory foam
  • Waterproof wraparound design with a vapor barrier
  • Compression release holes and condensation draining vents
  • 24″ high-visibility yellow guide stripe
  • Galvanized mounting hardware

Specs at a glance

ItemStandardOptions
Door opening8′ W x 10′ HCustom sizes made to order
Trailer heights12′ to 13.5′ on a 4′ dockAsk about other dock heights
Projection10″–
Base fabric22 oz Hi-Tear vinyl40 or 50 oz Hi-Tear vinyl, 16 or 40 oz Hi-Performance Hypalon
Side pads99% memory foam4″ full foam face pad with hook-and-loop split
Head curtainFull-width fabric curtainRope-and-pulley adjustment, hook-and-loop split, PVC drop curtain
Wear protection–4″, 8″ or 16″ wear flaps and pleats
Weather protectionWaterproof wraparound with vapor barrier, compression release holes, condensation draining vents–
Guide stripe24″ high-visibility yellow–
LumberStandardPressure-treated
HardwareGalvanized mounting hardware–

Options worth asking about

The standard build covers most docks. If yours takes more abuse or sees a wider spread of trailers, these are the add-ons to look at.

  • Rope-and-pulley adjustment to raise and lower the curtain by hand
  • Hook-and-loop split so the curtain can be repositioned after the truck docks
  • 4″, 8″ or 16″ wear flaps and pleats for high-traffic doors
  • Heavier fabrics, including 40 or 50 oz Hi-Tear vinyl and Hi-Performance Hypalon
  • PVC drop curtain

Where it fits

Warehouses and distribution centers running mixed fleets, plus cold storage, grocery distribution and manufacturing plants that can’t afford to heat or cool the parking lot.

Head curtain dock seal with foam side pads and yellow guide stripes on a warehouse loading dock door
DOCKSTAR

Head curtain vs. other dock seals and shelters

Not sure a head curtain is the right call? Compare it to the other dock seals and shelters we sell.

ProductDoor openingTrailer heightsTop sealBest for
Head curtain dock seal8′ x 10′12′ to 13.5′Fabric curtain drops to the trailer roofMixed fleets and temperature control
Fixed head pad dock seal8′ x 8′12′ to 13′Fixed foam head padUniform fleets that don’t need full trailer access
Adjustable head pad dock seal8′ x 10′11′ to 13.5′Foam head pad on a spring-loaded trackThe widest trailer range with a foam seal
Stationary dock shelter10.5′ x 10.5′12′ to 13.5′Curtain on a fixed frame, no contact with trailer sidesFull trailer access and bigger doors

Head curtain dock seal FAQs

What door size does a head curtain dock seal fit?

The standard unit is built for 8′ wide x 10′ high openings. Other sizes are made to order, so send your door dimensions with your quote request.

What trailer heights does it seal?

Trailers 12′ to 13.5′ tall on a standard 4′ dock. If your dock is higher or lower, tell us when you request a quote.

Head curtain seal or dock shelter?

A seal presses foam against the trailer sides, so it seals tighter and holds temperature better. A shelter never touches the trailer sides, which gives forklifts the full trailer width. If every inch of the opening matters, get a shelter. If keeping the cold in matters more, get the seal.

Can I adjust the curtain after the truck is docked?

Yes, with the hook-and-loop split option. The curtain can be repositioned while the trailer is still at the door.

Explore More Products

What we do

DockStar offers a complete suite of solutions for the modern loading dock, including dock levelers, dock bumpers, dock loading accessories, and weather seals. Beyond our core dock equipment offerings, DockStar also provides access to a curated selection of complementary products, further enhancing safety and efficiency within manufacturing environments. That includes eyewash stations, wire security storage, and spill containment systems.
industries we serve
loading dock products

GET IN TOUCH WITH A LOCAL DOCKSTAR REP TODAY!

dockstar industrial
Check out some of our recent projects!
Real Projects. Real Customers. Real Solutions.

DockStar Industrial coordinated a large commercial wire mesh storage locker project, including delivery follow-up, supplier coordination, installation planning, site visit support, and final project details for approximately 100 storage lockers.

Read More

DockStar Industrial supplied and installed a railcar dock seal for an industrial loading door, helping improve weather protection, reduce air and debris intrusion, and support railcar loading operations.

Read More

DockStar Industrial supplied wire security storage lockers for a new apartment building in Mineola, Long Island. The project included 4' x 4' x 7'-6" tenant storage lockers designed for secure resident storage, bike storage, and efficient storage room organization.

Read More